---

Outdated Drivers Can cause hardware related Errors. Check your PC Drivers now.

Rockwell/Conexant ACF String Explaination

Rockwell ACF (connect probs, but retain v90)

AT&F&C1&D2+MS=12

AT: (beginning of most inits) Attention!

&F: (factory init) Set all commands to the most commonly used.

&C1: (DCD signal) required if software uses the Carrier Detect pin to check if a carrier is present.

&D2: (DTR Option) instructs the modem to hangup upon a DTR signal drop, the most common way software instructs it to do so.

+MS=12: (select modulation) Set modulation to v90.