---

Outdated Drivers Can cause hardware related Errors. Check your PC Drivers now.

RPI 1st generation WITH DRIVERS String Explaination

RPI 1st generation WITH DRIVERS

AT&C1&D2&K3+H3S95=1

AT: (beginning of most inits) Attention!

&F: Sets the values loaded in the active profile to the values that are set in the default profile.

&C1: DCD enabled after a carrier signal is detected

&D2: DTR drop causes modem to hang up

&K3: Enable RTS/CTS flow control

+H3: Enable RPI and set computer speed to 57600 bps

S95=1: Use DCE when reporting CONNECT result codes